As guitar players, we all have that moment where we think, ‘How can I do this and still remain analogue?’ Once we have achieved the ‘ultimate tone, how can we boost that same tone without changing the quality? What if we want to boost the signal before your drive effect in order to increase sustain, or have a boost in front of your gain channel and another after the pre-amp in the effects loop? Well, Carl thought about this for quite a while and is now happy to introduce the super cool….’Dual Injenction’! Carl took the high quality, transparent boost from the Hot Drive’n Boost, and put two of them into one pedal. Each has it’s own level control and ‘True Bypass’ switch, plus there is another toggle which switches the Dual Injection between Serial and Parallel modes. In Serial mode, you use the Input/Output 1 on the back of the pedal and place the boost wherever you want in the signal chain. In Parallel mode, connect the Output 1 before your Drive or Preamp, and then use the Input/Output 2 on the side of the pedal to connect to your effects loop on the amp.
So, what does all this do for you? Well, the Dual Injenction gives you 4 different Boost settings…
1) Your normal set up either clean or with effects
2) Boost 1 engaged to a desired setting
3) Boost 2 engaged to a different setting than Boost 1
4) Both Boost 1 and Boost 2 engaged at the same time!
The Dual Injection is a high quality effect that can be powered by 9v battery or with the correct power transformer (we always recommend that you use a regulated power supply like the Carl Martin Pro Power). The effect is housed in our diecast case with custom paint, True Bypass Switching, large easy to use knobs and bright LED indicators for Boost 1 or 2.
- Download Manual
https://carlmartin.com/wp-content/uploads/2014/10/manual-dual-injection.pdf
Power Requirements
Battery: The Purple Moon does not accept batteries, as battery life will be too short.
Power consumption: max. 68 mA
Power supply: 9 V DC (regulated), 100 mA minimum, 2.1 mm female plug, center negative (-)
ATTENTION: Please Use DC Power Supply Only! Failure to do so may damage the unit and void the warranty.
Specifications
Input……………………….......... 1M Ohm
Output……………….................. 200 Ohm
S/N Ratio................................... 60 dB
Boost Max................................. 12 dB
Dimensions .............................. 120 (W) x 95 (D) x 56 (H) mm
4.72” (W) x 3.74” (D) x 2.2” (H)
Weight....................................... 420g/ 0.94lbs
*Street Price(미국내 실제판매가): $139
<Musicforce A/S Regulation>
The Term of Warranty
무상 A/S 기간은 구입일로부터 6개월입니다.
Untransferable Warranty
A/S Warranty는 뮤직포스에서 제품을 구매하신 최초구매자에게만 적용되며 제3자에게 상품판매 혹은 양도시
그 효력이 소멸됩니다.
소비자 과실로 인한 파손이나 오작동 발생시에는 유상으로 A/S가 진행됩니다.
| 품명 및 모델명 |
Carl Martin Dual Injection Boost Pedal | ||
| 제조사 (생산자) | Carl Martin | 크기 | 스펙 및 상세정보 참조 |
| 수입자 | (주)뮤직포스 글로벌 네트웍스 | 색상 | 스펙 및 상세정보 참조 |
| 원산지 | China | 재질 | 스펙 및 상세정보 참조 |
| 동일모델 출시년월 | 년 월 | 제품구성 | 스펙 및 상세정보 참조 |
| A/S 안내 | 뮤직포스 리페어 서비스 070-4116-5140 | 품질보증기준 | 하단안내 참조 |
