Minnow는 Bullhead EQ 섹션이 장착 된 고품질 저잡음 저음 프리 앰프 DI 페달입니다.


이 단일 채널 Bullhead 프리 앰프에는 BASS 및 TREBLE 컨트롤을 위한 Shelving EQ와 LO MID 및 HI MID를위한 가변대역 패스 EQ가 있습니다.


LO MID 및 HI MID 컨트롤 모두에 대해 선택 가능한 미드 주파수는 미드 레인지를 완벽하게 제어합니다.


또한 고음 주파수에 HI SHIFT를 추가하여 고음 컨트롤의 컷 / 부스트 기능을 추가로 조정했습니다.


Minnow 프리 앰프에는 튜닝을 위한 클린한 튜너 출력과

DI로 사용하기위한 균형 잡힌 XLR 출력이 포함되어있어 라이브 및 스튜디오 모두에 적합합니다.

주의사항:

DI 연결시 절대 콘솔이나 오디오 인터페이스의 팬텀파워를 켜지 마세요. 고장의 원인이 됩니다.

(이 경우 고장시 유상처리 됩니다. )

미노우는 자체적으로 액티브 디아이 이기때문에 팬텀파워가 필요 없습니다.

대신 아답터를 연결해서 사용합니다.  


12V 500ma전용 아답터 포함입니다. (국내용)




1. Out: 1/4” phone jack routes the signal to the destination device

2. Tuner Out: 1/4” phone jack sends signal to tuner. Stays active while in mute

3. Ground / Lift Switch: Ground lift dedicated to Direct Out

4. Direct Out XLR: Balanced XLR connection

5. Direct Out Pre/Post select switch: Switches between a Pre‐EQ or Post‐EQ send

6. In: Instrument input 1/4” phone plug line input

7. DC In: AC mains input with power on/off LED indicator. Attach cable firmly into socket. 12V 500mA Center Negative, illuminated blue LED indicates power is on. No light means power is off

8. Gain with level indicator: Input level adjust, green LED indicates signal and red LED indicates a clip

9. Lo Mid frequency select: Selects the frequency for the Lo Mid bandpass EQ

10. Bass shelving EQ cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

11. Lo Mid cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

12. On footswitch: Engages EQ

13. Master: Controls the overall output volume

14. Hi Mid frequency select: Selects the frequency for the Hi Mid bandpass EQ

15. Treble shelving EQ cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

16. Hi Shift: Treble frequency shelving shift button, Out is low (4kHz), In is high (8kHz)

17. Hi Mid cut/boost: Center is flat. Counter clockwise cuts, clockwise rotation boosts

18. Mute footswitch: Mutes all outputs except the tuner out


Minnow Specifications

Pre-Amp: Low noise solid state

Instrument Input: ¼’ Phone with rotary gain control

Input Level Indicator: Signal level and Clip LEDs (green/red)

EQ: 4 Band with switchable Mid

Shelving Bass and Treble

Low-Mid and Hi–Mid -Variable Gain, Band Pass EQ with selectable frequency/bandwidth options

Hi-Shift treble frequency selection

Master Volume: Rotary Control

EQ On/Off Footswitch

Mute Footswitch

Tuner Out: ¼” Phone jack


Amp Out: ¼” Phone jack

Direct Out: 600 Ohm Balanced XLR, Pre/Post, and Ground Lift

Power Supply (Not Included): Switch-Mode Power Supply, Output 12V (0.5A)

Chassis: Steel

Removable Rubber Feet: Adhesive backed

Size:

(H x W x D in.) 6.05″ x 4.85″ x 1.73″
(H x W x D mm) 153.8mm x 123.4mm x 44.1mm

Weight: 1.81 lbs.